Mini front driving hub-motor Evel Mini F100 36V 350W is intended for installation on the front axle of the bike. Six-bolt mounting of a standard
brake disk (compatible with Shimano, Avid, Tektro, Hygia, Hayes, Hope, Formula, etc.) is provided. The maximum length of the brake disc mounting
bolts is 9mm! If the disc brake is not used holes must be indispensably capped with M5 bolts 5 -7mm long.
Front-wheel drive is very easy to install as no gearing system adjustment is required.
The following items are also needed to install the motor-wheel:
• Controller kit 36V 15А
• 36V battery with a charger
• spokes and rim
Light, almost invisible geared mini hub motor Evel Mini F100 for installation on the front axle of the bike. Weighing just
2kg this little youngling is ready to compete with its five-kilogram counterparts in the torque and maximum speed. Having a standard
controller 36V15A, the mini motor will give 630W peak power! And do not confuse it with three-kilogram geared motors, their time
has passed. Now the devotees of minimalism have an opportunity to create a superlight electric bike the engine of which can be
distinguished not only by a specialist. The installation option of the mini motor wheel will be suitable for true connoisseurs of pedal
drive for several reasons.
First, the 36V 350W mini motor is only 1.5 kg heavier than the usual bicycle hub and provides the same easy rolling as a high quality
bicycle hub. If you also install light rim and tire, your wheel will weigh no more than 3kg (for comparison - a standard ready-assembled
rear 500W motor-wheel weighs an average of 7.5 kg and a rear wheel of an inexpensive mountain bike weighs 2.5-3kg without a
Second, mini motor wheels not require thick and heavy reinforced spokes, because the weight of the unsprung mass is practically the
same as that of a regular bike. You can use light durable eyelet rims, since there is no need to drill out holes for nipples. Spokes 2-2.3
mm thick are sufficient. Minimal unsprung mass is the best performance of the shock absorbers of your bike.
Third, the lighter the wheel, the easier it is to spin it up (for the same acceleration dynamics lightweight wheels require much less
consumption of energy, whether it be the battery power or the power of your muscles). This means that the distance from one socket
to another socket will grow, and the absence of resistance and excess weight will allow as easy pedaling as on a regular bike.
Minimum weight of the rear wheel will extend the lifetime of the gearing system (chain, sprockets).
Fourth, the lighter the wheel, the easier it is to stop it, moreover mounting under the disc brake is provided on the mini motor wheel.
Fifth, not strong current of the electrical system with the mini motor allows using miniature sealed connectors for power cable
conductors. For the purpose of tire fitting you can disconnect the motor cable in one motion
And, of course, the aesthetics! It is simply unobservable.
We recommend installing the motor wheel of Evel Mini series with Evel Mini controller. This will allow exploiting it as correctly and
carefully as practical with a system of pedals assistance and current limit of 15A.
Cannot your friend, child or wife bear your cycling pace? Do your knees hurt while climbing up steep slopes? Do you want to go to
work by bike, but without arriving at the destination sweaty? There is an elegant solution - a mini motor wheel!
Note, the lightness and noiselessness of the gearbox are achieved with the use of gear wheels made of high temperature nylon.
Therefore, in order to extend the lifetime of the motor it is recommended to start by using pedals, avoid sudden starts and long-term
maximum loads, especially on bikes with big wheels (28-29 inches).
If you plan to carry cargos or ride the bike without using pedals, we recommended you to consider more powerful gearless rear